A premier manufacturer and
supplier of Surface/Trench Drains. LTEC Drains offer Architects,
Contractors, Engineers, Stormwater Managers, and Homeowners a superior
product for their applications. Our drains are suitable for residential,
commercial, heavy industrial, and BMP installations. They can be
installed in a variety of surfaces such as concrete, asphalt, and paving
stones. LTEC Drains are considered to be the most competitive
Surface/Trench drain on the market because of their affordability,
effectiveness, easy cleaning, and installation. |
LTEC
RESIDENTIAL/BMP/COMMERCIAL DRAINS
LTEC's drain grates are 3/16" powder coated steel measuring 4" wide by 2
1/2" tall. We offer 4” – 8” – 12” drain configurations. They work very
well for BMP applications, garage flooding prevention, driveway pooling,
parking lot runoff, car washes, gas stations and anywhere liquid runoff
needs to be controlled. LTEC Drains will support fire engines, fully
loaded semi trucks and trailers, industrial machinery, and automobiles.
We are approved, certified, and endorsed
by multiple county building departments, and by multiple environmental
agencies that surround Lake Tahoe (we are a Lake Tahoe based company
operating throughout the Central and Northern California regions). The
engineers and architects from several agencies have conducted tests,
studies, and have written several reports on how effective the LTEC
drain system captures and conveys runoff to infiltration systems. We
have earned an A+ for several reasons;
-
For concrete installations we fabricate
U shaped feet out of re-bar that are welded to the bottom of the
channel, this serves two purposes, it sets the drain channel at the
correct height allowing concrete to fill the trench from the bottom up
and acts as hold downs for the channel when encased in concrete. Our
drain does not float, no other installation hardware is required.
-
LTEC drains exceed AASHTO H-20/HS-20,
32,000lbs per axle requirements easily, we're actually more in the
H-25/HS-25 load range.
|